Quinny buzz Instruction Manual download pdf (Page 3)

Please note: the left and right sides are as seen from the handlebar/back.

4.1 Preparation for use

Fitting the wheels

1. Insert the axle of the rear wheels into the Quinny Buzz frame until it ‘clicks’

(Fig. 1).

2. Push the front fork into the frame until it ‘clicks’ (Fig. 2).

3. Check that the wheels are properly secured.

Unfolding the frame

The Quinny Buzz has a unique mechanism, which results in the automatic unfolding

of the frame. The temperature of the environment may somewhat affect the workings

of this mechanism; in case of cool or freezing temperatures the Quinny Buzz may

unfold slower than usual (room temperature).

- Warning: do not touch any moving parts with your hands as the frame unfolds.

4. Push the transport hook near the right rear bar to the side and pull the handlebar

up (Fig. 3).

5. The frame automatically unfolds. The handlebar clicks into the locking device

(Fig. 4).

Adjusting the handlebar height

- Push the adjustment button in and slide the handlebar to the desired height.

The handlebar will lock with a ‘click’ (Fig. 5).

Parking brake

- Note: always use the parking brake, even when standing still for only a few

moments!

1. Push down on the red pedal (P) to set the parking brake on the Quinny Buzz (Fig. 6).

2. Push down on the other pedal to release the brake of the Quinny Buzz.

Adapters

The adapters and the corresponding connection points are marked with an L (left)

and an R (right).

1. Make sure that connection points are facing directly upwards, if necessary adjust

using silver button in connection point (Fig. 7).

2. Slide adapter into connection point (Fig. 8).

3. Check to make sure everything is secure.

4. Place the Dreami (Fig. 9). For further use see the instructions for the carrycot.

5. Place the Maxi-Cosi baby car seat (Fig. 10). For further use see the Maxi-Cosi baby

car seat instruction manual.

6. Remove the adapter by pressing in the button (on the inside) and pull the adapter

from the Quinny Buzz frame (Fig. 11).

Quinny Buzz pushchair seat unit

The Quinny Buzz seat is suitable for children from birth (maximum of 15 kg).

If your child is not yet able to sit up unassisted, use the reclining position only.

- Note: the pushchair seat unit can only be ﬁtted when the adapters have been

removed.

1. Lower the Quinny Buzz seat onto the Quinny Buzz frame until it ‘clicks’ (Fig. 12).

Placing the Quinny Buzz seat & adjusting the seat

Rearward facing

1. The Quinny Buzz seat can now be adjusted to two positions: a sitting position and

a reclining position. Push the adjustment/release buttons on both sides downwards

and tilt the Quinny Buzz seat into the desired position (Fig. 13).

2. The Quinny Buzz seat can also be placed in a forward-facing position (Fig. 14).

3. The Quinny Buzz insert can now be adjusted to three positions: a sitting position, a

semi-reclining position and a reclining position. Push the adjustment/release

buttons on both sides downwards and tilt the Quinny Buzz insert into the desired

position (Fig. 15).

IMPORTANT: When positioning and adjusting the Quinny Buzz seat check that the

adjustment/release buttons are locked on both sides.

Removing the Quinny Buzz insert

1. Push the adjustment/release buttons on both sides downwards and lift the Quinny

Buzz seat from the Quinny Buzz frame position (Fig. 16).

Locking the swivel wheel

It is advisable to lock the swivel wheel into a ﬁxed position when driving the

pushchair straight ahead for a longer period.

1. Push the swivel wheel lock downwards and turn the wheel into the backward

position until you hear a ‘click’. The front wheels are now locked into their ﬁxed

position.

2. To unlock the swivel wheel, push the swivel wheel locks upwards (Fig. 17).

Sun canopy

1. Clip the sun canopy onto the frame of the Quinny Buzz seat. Check that the sun

canopy is properly secured. The sun canopy is height adjustable (Fig. 18).

2. To remove the sun canopy push the clips off the frame.

3. There is a special sun shade for extra protection. Unfold the sun shade from under

the sun canopy towards the outside (Fig. 19).

Raincover

1. Place the transparent raincover over the sun canopy and hook it over the

underside of the footrest (Fig. 20).

2. The sun canopy is height-adjustable (Fig. 21). With the sun canopy at its lowest

setting: close the snaps on the foot section (Fig. 22).

3. The (double) zipper in the rain cover can be opened for extra ventilation (Fig. 23).

4 PREPARING FOR USE / UNFOLDING AND

FOLDING / DISMANTLING

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

A_Buzz3 Page_1

English

4 5

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Quinny buzz Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Baby carriers Quinny buzz